| No. | item | Parameter |
| 1 | Model: |
Copper rod cold rolling mill, copper alloy cold rolling mill. Other metal rod cold rolling mill, other alloy cold rolling mill, copper / aluminum continuous casting and rolling etc. |
| 2 | Input dia |
Ф55mm、Ф35mm、Ф25mm、Ф20mm、Ф17mm、Ф 16mm、Ф14.4mm、Ф12.5mm、Ф8mm etc. |
| 3 | Output dia |
Ф20mm、Ф18mm、Ф17mm、Ф8mm、Ф6mm、Ф 5mm、Ф4mm、Ф3 mm etc. |
| 4 | Outlet rod out of roundness | No more than 0.2mm after rolling, or more accurate |
| 5 | Rolling pass | 2-16 or as each customer’s requirements |
| 6 | Rolling speed |
Max 3M/s for continuous rolling, Max 5M/s for discontinuous rolling. |
| 7 | Pass schedule |
ellipse-round hole type system or triangular -round type system |
| 8 | total extend compression ratio | 2-10, or as each customer’s requirements |
| 9 | each pass compression ratio | 1.15～1.4（hole type can change） |
| 10 | Total power | 100kw～500kw |
| 11 | Running mode |
Each frame separate transmission speed controlled by frequency or AC servo |
| 12 | Operation mode |
PLC control, touch screen display, can improve to DCS control or networking |
| 13 | type |
2 high horizontal- vertical or 3 high positive triangle-inverted triangle |
| 14 | nominal roller dia |
Ф200mm（double-groove/multi-groove）、Ф248mm（double-groove/multi-groove）、 Ф264mm、Ф300mm、Ф370mm、Ф400mm etc. |
| 15 | No. of frame | 2-16 or more |
| 16 | Main motor |
11kw-110kw AC frequency motor or AV servo motor for each |
| 17 | roller material | other imported material etc. |
| 18 | rolling mill size |
a complete production line: length 18m *width 6 m*height 2.5m |
| 19 | height of center | height from the ground 1230mm |
